Stainless Steel Maintenance

Clean stainless steel can make or break a kitchen, boat, grill, and all the other applications that stainless steel is used. Below you will find the correct ways to clean and polish your stainless. Stainless steel cleaning can sometimes be tricky, but just follow the advice shown below and you will be bright and shiny in no time.

GENERAL CLEANING
Depending on the condition of your stainless steel surface, simple soap and water will remove most of all dirt and debris build up. It is recommended that you use a cleaner or polish like Sheila Shine after the surface completely dries. Doing so will bring out its luster and restore it to its original shine.

DEEP CLEANING
If the stainless steel surface requires a more intense cleaning, like a grill or oven, a non toxic cleaner should be used. A semi-abrasive chemical can be used as long as you thoroughly apply water to rinse away any residue that could be left behind. Always rub with the grain (See below for more information).

For a non-toxic, inexpensive, abrasive cleaner; try baking soda. Simply apply baking soda over the stainless steel surface. Take a moist cloth with clean water and rub the cloth over the baking soda to remove affected areas. Rinse well and dry with another clean, dry cloth and then apply Sheila Shine for finished look.

AVOID SCRATCHING
ALWAYS when cleaning any stainless steel rub "with the grain". Most stainless steel has a brushed grain that runs side-to-side. Make sure when cleaning any stainless surface you rub with the horizontal grain lines to avoid scratching the stainless steel.

HARD WATER DEPOSITS
If you encounter that your stainless steel develops hard-water deposits on its surface, you can dissolve them by using white vinegar. Simply take a cloth and saturate it with full-strength white vinegar and rub the vinegar on the affronted spots. After the deposits are removed, apply Sheila Shine Cleaner / Polish to brighten and restore the stainless steel luster.

STEEL WOOL
It is never recommended that anyone scrub a stainless steel surface using steel wool. Using steel wool can damage the surface by leaving tiny fibers in the stainless steel that will rust over time. We recommend a softer application with a "tough" side to remove stubborn dirt, grit, and other things. See the Micro fiber sponge for an example of what could be used.

USING ABRASIVE & STRONG CHEMICALS
Abrasive chemicals can be effective when cleaning stainless steel. Strong and harsh cleaners can remove difficult stains or residues that build up; however, it is extremely important to completely rinse any surfaces that the chemicals are used on clearing them of any lingering toxins. If left unattended, corrosion may occur on treated areas. It is advised that bleach not be allowed to sit for an extended period of time on stainless steel. If cleaned properly with a mild detergent, just apply Sheila Shine for the final polish.

WHY USE SHEILA SHINE?
Sheila Shine is not only a great cleaner and polish, it is a preserver! Because of the high petroleum content, Sheila Shine protects stainless steel from airborne dirt and debris that can later turn into big problems. Applying Sheila Shine after you clean will clear away any missed areas that may be lingering. It will continue to protect stainless steel through harsh weather elements where other cleaners/polishes can not. Sheila Shine has the power to make your stainless steel retain the original luster you want and protect it for years on out. No other stainless polish product has the capability of providing a finished look like Sheila Shine.